B-Series Cam Trigger Kit

The use of this kit allows you to change from the factory Honda mag sensors in the distributor to a more precise digital signal from this sensor. Many aftermarket ECUs read the Hall signal much better than they do the OEM signal from the distributor. Most experience a smoother idle & much smoother power at higher RPM.

This also allows complete removal of the factory distributor when a multi-channel CDI box & individual coils are used with it. If you want to keep a single channel ignition box & the distributor, then this setup can still be used. These signals are on the input side of the ecu, while the ignition system is on the output. Any combination of ignition box/coils will work.

• 1 Tronicworkz exhaust cam gear with rare earth magnets installed.
• 1 Tronicworkz intake cam gear
• 1 Dual Pole Hall sensor & mating connector
• 1 sensor bracket